Powis Parker FastBack Model 11 Spécifications télécharger pdf (Page 9)

FASTBACK 9 USER’S MANUAL, 203860 Rev. A 9

BINDING A DOCUMENT

WITH IMAGE STRIPS™

VII-B

1. Set the binder to IMAGE mode. If the machine is in IMAGE mode,

the display will read “READY TO BIND” … “IMAGE.”

2. Select your Image Strip™ according to your document thickness:

10-125 sheets= Narrow

(This may vary slightly depending on the paper and cover thickness.)

3. Foldthestriptoa90°angle(gure7a).Makesuretheadhesiveside

faces inward.

4. Place the strip into the binding recess with the adhesive side facing

up, and the Image Strip’s front panel facing the rear of the binder.

The long side of the bent “L” should be resting against the back wall.

Slidethestripallthewaytotheright(gure7b).

5. Tampyourdocumentcoverandpagesonthefrontatsurfaceofthe

housing so that they are straight. Place the document on top of the

strip with the front of the document facing the rear of the binder. Slide

thedocumentallthewaytotheright(gure8).

6. Tap the document on the top and the left to be sure all pages are

even. Push the pages backward to ensure proper binding. Check that

thedocumentedgealignswiththeedgeofthestrip(gure9).

7. PresstheBINDbutton(gure10).Thebindingprocesswillbegin.

•

NOTE: Stoppingthebindingprocess:Duringtherstseveral

seconds of the binding cycle, you can push the OPEN button

(the orange button closest to the front) to abort the whole process

and open the document clamps. Use a new binding strip when the

process resumes.

8. Assoonasthedisplayashes“REMOVEBOOK,”pickupthe

documentandplaceitagainstarearbooksupportfence(gure11).

9. Letthebounddocumentcoolforveminutes.

F I G U R E 7a

F I G U R E 7b

F I G U R E 8

F I G U R E 9

F I G U R E 10

F I G U R E 11

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 29 30

Pas de commentaire

Powis Parker FastBack Model 11 Spécifications Page 9