Powis Parker FastBack Model 11 Manuel d'instructions télécharger pdf (Page 5)

SCORER USER’S MANUAL

FIRST TIME SETUP II

B. Setting Up

Place the machine on a flat, stable work surface. Cut the

two shipping bands. Remove the cardboard Centering

Guide retainer and the dark cover that is under the clear

bar. Your Scorer is now ready to use!

A. What’s Included Inside the Box

Scoring Machine with Die Holder

Accessory Pack, which contains:

Starter kit of:

5 narrow Perfectback™ LF™(layflat) strips

3 preprinted wraparound covers

1 Demonstration Cover

2 extra die holder pins

User’s manual

If any of the preceding items are damaged or missing,

contact your dealer immediately.

C. Changing Die Holders

Two metal pins attach the front and rear of the

Die Holder to the machine (figure 2). To remove

the Die Holder, push these pins out sideways with

a pointed object such as a small screwdriver.

The Die Holder may now be lifted off — it is best

removed by keeping it level while lifting. Because of

the exacting fit of the parts, if the Die Holder gets

slightly angled it may stick while being lifted. Should

that happen, gently push it down and start again.

To install a different Die Holder make sure the fully

rounded end of the clear bar faces the front of the

machine. Maneuver the bar so it slides onto the two

vertical shafts sticking up from the platform of the

machine. Carefully lower it all the way down. Reinsert

the front and rear pins from the side to secure the bar.

F I G U R E 2

1 2 3 4 5 6 7 8 9 10 ... 26 27

Pas de commentaire

Powis Parker FastBack Model 11 Manuel d'instructions Page 5